Products
We are a one-stop shop for all your Pipe Line and Structural Steel requirements.
Supplying Oil and Gas, Industrial, and Construction Equipments worldwide for over 15 years.
AIMPACT PLUS accumulated experience in supplying all kinds of day-to-day and Project requirements made it the most trusted and leading supplier of bulk piping and flowline materials i.e Line Pipes, Fittings, Flanges, Valves, Stud Bolts, Gaskets, Spade & Spacers, Spectacle Blinds, Strainers, and Industrial Products.
Line Pipes
Sizes: 1/2” to 48” (NPS) Schedule: 5S to XXS
Materials: Carbon, Low Temp, Stainless, Chrome, Moly, Aluminum, Duplex, Alloy steel, Inconel, Nickel Alloys, Hastelloy, Titanium
Grades: A53, A106Gr.A/B/C, API5LGr.A/B, 5L, 5L X51 to X60, A333Gr.1 to 6, AISI 304, 304L, 304H, 310, 316, 316L, 316H, 321, 347, 904, 904L A335 Gr. P1 to P91, NACE MR‐01‐75
Standards: ASTM , ASME , API , BS , DIN , AFNOR , JIS , UNI , SIS , GOST
Types: SMLS, ERW, SAW, EFW,
Pipe Coatings: Galvanized, Epoxy, Fusion Bonded Epoxy, 3 layers PE
Flanges
Sizes: ½” to 60”
Types: Weld Neck, Blind, Socket Weld, Slip‐On, Threaded, Lap Joint, Long Weld Neck, Anchor, Orifice, Spectacle Blind, Spade & Spacer, Swivel.
Class: 150 to 2500 lbs
Schedule: 10s to XXS
Standards: ASTM, ASME, API, BS, DIN, AFNOR, JIS, UNI, SIS, GOST
Materials: Carbon, Low Temp, Stainless, Chrome, Moly, Aluminum, Duplex, Alloy steel, Inconel, Nickel Alloys, Hastelloy, Titanium
Grades: A105, A350, A420, A234, A182, A403, A815, WPB, WPL6, LF2, 316, 316L, 304, 304L, WPHYX42 to X60, F11 to F91, WP11 to WP91, UNS31803, 321, NACE MR‐01‐75
Forged Fittings
Sizes: ½” to 6”
(Elbow, Tee, Caps, Coupling, Swage Nipples, Pipe Nipples, Welding Boss, Cross, Plugs )
Types: Threaded and Socket weld
Ends: NPT, BSPT, Socket Weld
Class: 2000 to 9000 lbs
Branch Fittings
Types: Weldolet, Sockolet, Nippolet,
Run Size: Up to 48”
Class: 3000 to 9000 lbs
Schedule: 10S to XXS
Buttweld Fittings
Sizes: ½” to 48”
(Elbow, Tee, Reducer, Cap, Cross)
Type: SMLS, Welded
Schedule: 10S to XXS
VALVES
Materials: Carbon, Low Temp, Stainless, Cast Iron, Bronze, Brass, Chrome, Moly, Aluminum, Duplex, Alloy steel, Inconel, Nickel Alloys, Hastelloy, Titanium
Grades: A216 WCB, A105, CF8/8M, LF2, 316, 316L , 304, 304L, 321, F11 to F91 NACE MR‐01‐75
Standards: ANSI, ASME, API, BS, DIN, AFNOR, JIS, UNI, SIS, GOST
Ball Valves
Sizes: ¼” to 48” Cast/Forged Body
Class: 800, 2000, 2250, 3000, 5000 PSI (THDD & SW), 150 TO 2500 (FLANGED ENDS)
Ends: Threaded, Socket Weld, Flanged & Butt Weld.
Port: Regular & Full
Construction: Floating Ball, Trunnion Mounted, Side Entry, Top Entry
Actuators: Electric, Pneumatic, Hydraulic, Gear Operated.
Gate, Globe & Check Valves
Sizes: ¼” to 2” Forged Body / Cast Body 2” to 36” Cast Body
Class: 800, 1500, 3000, (THDD & SW) 150 TO 2500 (FLANGED ENDS)
Ends: Threaded, Socket Weld, Flanged, & Butt Weld
Port: Reduced or Full
Bonnet: Bolted, Welded, Pressure Seal
Wedge: Solid or Flexible
Gate Types: Slab, Knife, Pipeline API6D Gate,
Check Types: Piston, Swing, Ball, Wafer, Lug
Globe Types: Flat, Tapered, Plug, or Regulating Disc Angle
Actuators: Electric, Pneumatic, Hydraulic, Gear Operated
Needle Valve
Sizes: ¼” to 1”
Class: 6000, 10000 PSI
Ends: Threaded, Socket Weld, Flanged & Butt Weld
Port: Reduced or Full
Bonnet: Bolted, Welded, Pressure Seal
Wedge: Solid or Flexible
Gate Types: Slab, Knife, Pipeline API6D Gate,
Check Types: Piston, Swing, Ball, Wafer, Lug Globe Types: Flat, Tapered, Plug, or Regulating Disc Angle
Actuators: Electric, Pneumatic, Hydraulic, Gear Operated
Butterfly Valve
Sizes: 2” to 48”
Class: 150 to 2500
Types: Wafer, Lug, Center Flanged, Double Flanged
Actuators: Electric, Pneumatic, Hydraulic, Gear Operated
Control Valves
Sizes: 1” to 12”
Class: 150 to 2500
Types: Globe, Ball, Double Acting, Spring Return
Actuators: Pneumatic, Electric, Hydraulic
Safety Relief Valves
Sizes: ½” to 8”
Class: 150, to 2500
Types: Pressure Relief, Temperature Relief, Open Lever, Closed Cap
Media: Air, Gas, Liquids
Actuators
Torques: 150 NM to 250000 NM
Types: Pneumatic, Electric, Hydraulic
Action: Spring Return, Double Acting, Single Acting
Solenoid Valves
Sizes: 1/8” to 12”
Type: Two Way, Three Way, Four Way
Media: Air, Water
Stud Bolts
Standards: ASTM, ASME, API, BS, DIN, AFNOR, JIS, UNI, SIS, GOST Chrome, Moly, Aluminum, Duplex, Alloy steel, Inconel, Nickel Alloys, Hastelloy, Titanium
Grades: A193, A194, A320 B7, B7M, 2H, 2HM, L7, L7M, 7, 4, B8, B8M, 8, 8M, B16 NACE MR‐ 01‐75
Types: Stud Bolts, Anchor Bolts, Turbine Bolting, High Tensile Threaded Rods, Hex Head Bolt, Cap Screws, Nuts, & Washers.
Threading: ISO System‐Triangular proof thread, Symmetric Trapezoidal, thread, ISO Pipe Thread. ASA System‐UNC Triangular Profile thread (Standard Services), UNF Triangular Profile Thread (Special Series), NPT Conical Thread with Triangular Profile ACME Trapezoidal profile thread.
Coatings: Cadmium, Galvanized, PTFE, XYLAN
Gaskets, Insulation Kits & Sheets
Gaskets
Materials: Soft Iron, Stainless Steel, Carbon Steel, Monel, Nickel Alloys, Incoloy, Titanium, Duplex.
Grade: SS304, SS316, F11, F22, 904L, UNS 8825
Types: Spiral Wound, Sheet gasket, Ring Joint, Gasket, Metal Jacketed.
Spiral Type: CGI, CG
RTJ Type: Oval, Octagonal
Sheet Type: Raised Face, Full Face Metal Jacketed
Type: Single, Double
Sizes: ½” to 48”
Class: 150 to 2500
Filler: Graphite, Non-Asbestos, PTFE, Asbestos
Insulation Kit:
Materials: Gasket –Reinforced Phenolic, Neoprene faced Sleeve‐ Polyethylene, Phenolic, Mylar, Minion, Nomex, CAF. Washer – Carbon Steel, Phenolic.
Types: RF, Full Face, RTJ
Sizes: ½” TO 24”
Class: 150 to 2500
Sheets:
Sizes: 1.5m x 1.5m, 2m x 1.5m Thickness : 1mm to 3m
Materials: Asbestos, Non-Asbestos, Graphite, 316 Tanged Inserted, Rubber, Graphited.
